Find your cutting-machine generation before buying a tool
Cameo 3 versus Cameo 4, Joy versus Joy Xtra, and ScanNCut versus ScanNCut DX can change the correct order.
Guides
13 guides
Find the model
Parts & compatibility
Blade, housing or complete tool: what do you actually need?
A replacement blade repairs a worn cutting edge; it does not replace a missing holder or give the machine a different tool system.
Cricut Maker and Explore blades: which tools are shared?
Premium Fine-Point, Deep-Point and Bonded-Fabric systems are shared; Maker geared tools have different requirements.
Cricut Joy and Joy Xtra: shared blades, different mats
The Joy blade system is shared, but mat width and Print Then Cut support still depend on the machine.
Silhouette AutoBlade Type A or Type B: match the item number
Type A SILH-BLADE-AUTO and Type B SILH-BLADE-AUTO-2 belong to different machine generations.
Brother ScanNCut DX: Auto Blade, Thin Fabric or Rotary?
CADXBLD1 and CADXBLDQ1 need different holders; the rotary replacement is another separate system.
Siser Juliet and Romeo: 45°, 60° or Deep Cut blade?
These cutters share blade types and a holder, but their replacement cutting strips have different widths.
Adhesive vinyl or iron-on: which side faces down?
Decal vinyl, heat-transfer vinyl and printable materials have different carriers and transfer steps.
QuickSwap, Rotary Blade and Knife Blade: three different housings
A Maker tool with a gear is not automatically a QuickSwap tool. Order the housing that belongs to the operation.
Silhouette tool adapters: a native fit and an adapted fit differ
Read the machine column and adapter note together; an older blade can require an extra piece in a newer carriage.
Use & care
Cuts tearing, lifting or not going through? Start with a test cut
Change the cause you can observe: attachment, material hold, blade exposure, force or print alignment.
Cricut Print Then Cut is offset: check scale, then calibrate
A resized printed page or a moving sheet cannot be repaired by choosing a different blade.
Buying advice
Choose a cutting mat by machine size, then grip
The correct adhesive strength cannot make a mat with the wrong width or loading geometry fit your cutter.